From Wiki

Revision as of 07:30, 18 January 2010 by Cell (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

Here's a proof-of-concept implementation of a i2c-based fly-by-wire throttle setup.


Its very similar to the i2c sensor network prototype, but it uses a servo for the output instead of a gauge.

The accelerator pedal is an arcade unit from happ electronics. its been in my parts bin waiting for the day I turn it into the foot control of a DIY tig welder.


here's a descriptive video on youtube: http://www.youtube.com/watch?v=tciLgdMQsOE


here are the sketches:


here's the hex:

Personal tools